 |
 |
 |
 |
 |
 |
 |
 |
 |
|
The most advanced technology in automatic vacuum degassing.
Safe, economical and offers maximum profitability.
 |
The Slinger degasser is a highly desirable device for manufacturing engaged in casting resin compounds where no voids or gas bubbles can be present in the finished product because it has high efficiency slinging discs and a low maintenance gear pump.
The degasser operates on the principle of continuously exposing a thin moving film of liquid to an adequate vacuum. Heaters bring the material to the processing temperature, thus reducing the viscosity while at the same time aiding in the elimination of gases and/or water by vaporization.
The unit handle mixtures of resin as well as single resins, including epoxies, polyesters, polyurethane, polysulfide casting compounds, silicones and PVC plastisols. It will handle most powered fillers, but it is not recommended for resins containing abrasive or fibrous fillers. Batch tanks are recommended for those applications.
Due to its on demand type of operation, the slinger degasser virtually eliminates the problems associated with the heating, cooling, and reheating of temperature and moisture sensitive resins. "No Batch (Day) Tanks. Go Directly from your drum to your process uninterrupted!"
 |
 |
 |
STANDARD DEVICES
• Precision (Gerotor) pump
• Capacitance probe type liquid level control
• Double action cascading agitator
• Material intake valve with adjustable flow-rate
• PLC control module with (LED) display
• High performance resistance type wall heaters
• Solid state heater controls
• Two Sight ports one with vapor condenser
• Material dip tube complete with quick disconnect coupling,
suction tube and drum fastener
• Adjustable vacuum switch and 30" gauge
• Individual PID Digital temperature controllers
 |
OPTIONAL DEVICES
• Heated or unheated tank
• Electric drive motor with variable speed
• 15 CFM vacuum pump
• Digital vacuum control, complete with meter indication
and alarm
• Dual discharge valves
• Heated suction and discharge lines
• Air dryer or nitrogen back filling system to prevent moisture
• Continuous liquid level probe with LCD Display
POWER REQUIREMENTS:
240 Vac, 60 Hz, 3 Phase OR
380 Vac, 50 Hz, 3 Phase with neutral
